Connected to your bluetooth tools, connected to advanced diagnostics, connected to just in time education, connected to your benchmark, connected to office, connected to your lead tech,
with measureQuick HVAC can have it solved right the first time before you would otherwise be ready to take your first measurement!

Start the A/C System, and in the amount of time it takes to stabilize, measureQuick can run a system full diagnostic identifying over 100 major and minor fault types and combinations, determine the superheat, subcooling and approach. It can calculate the airflow, measure the total, sensible and latent capacity, determine the efficiency and much much more using continuous and real-time calculations. Enter the model and serial numbers with some customer information and you are ready to print your first measureQuick Report!

measureQuick..It’s not just for Air-Conditioning!


measureQuick can be used to improve your outcomes year around no matter what type of market you service. From A/C and gas furnaces to refrigeration we have you covered.
Exclusively, measureQuick also offers non-invasive system testing (NIST testing) that allows for your technician to perform a complete test of the system without installing refrigerant gauges.
measureQuick Modes include options for
- Air Conditioning or heat pump cooling
- Heat pump in heating mode
- Heat pump
- Electric strip
- Gas furnaces and Boilers
- 60-70% with draft hood
- 80+ Draft induced
- 90+ Condensing
- Non-invasive testing air conditioning
- Non-invasive testing heat pumps
- Heat pump
- Refrigeration
- Beverage coolers
- Beer coolers
- Wine coolers
- Floral coolers
- Product coolers
- Smoked meat coolers
- Service Deli
- Seafood
- Multi-Deck
- Walk-in
- Ice Cream
Intelligent Service & Maintenance
mQ HVAC Home Tab Tour
How to Navigate the mQ HVAC Home Tab
Welcome to the measureQuick HVAC interface. This is your home screen where you can view your basic operating dimensions. View Superheat and Subcooling to the exact pressure and temperature. No more manifolds!! Because of the measureQuick application, you don't have to carry around as much clunky gear anymore.
mQ... saving your time and your sexy body.
Hover over each feature to learn more.

User information tab

In this tab, the user can upload a company logo, check permissions (this is important if the user is a part of an energy commission or if mQ has a dedicated workflow for the user), logout, view which version of the app is being used, shop for supported tools, view the website, or view mQ attributions.
Test Modes

This screen will allow the user to toggle between test modes. Once selected, the image on the home screen will reflect the mode the technician is currently using and the title of the test will match as well.
Refrigerant Selection

Tap here to change refrigerant type. Once selected, the chosen option will appear on the home page as well as under System Info.
Settings

Change units of measure, toggle general app settings or apply Demo Data under the Settings option.
Diagnostics

One of the best and most utilized feature of measureQuick.
The diagnostics show what may be wrong with the system. Flags can be cleared by the user after a determination is made whether an issue exists.
The number next to the flag is a "symptom of" the fault displayed. In this case, there are 5 symptoms of key data points missing for diagnostics. The technician is to perform a visual inspection and other tests to determine what the fault actually is.
Evaporator Saturation

Condenser Saturation

System Configurations

The System Configurations tabs allow the technician to easily change critical information about the system. The picture is an example of the design airflow target.
These targets can also be changed in the System Info Tab.
Outdoor Measurements

Under the Outdoor Measurements, the user can view any of the system targets (suction line, superheat, subcooling and liquid line) by tapping on the illustrated meter.
Indoor Measurements

Just like the Outdoor Measurement screen, the user can view system targets by tapping on the illustrated meters. Scroll over the illustrated meters to find additional targets for change in enthalpy, airflow, change in temp split and pounds/hour dehumidified. Under the Indoor Measurements button, the user can view actual data that is being pulled in by any wireless probes. The icon next to the data displays if the data is coming in from a probe or if it is being calculated by the app itself. If there is a blank box, the user can manually add data. After all data is entered, the screen can then be captured in a snapshot for submitting reports.
Set Benchmark
Set the benchmark when the system is stable and running at its optimal charge, airflow and performance. The benchmark will be saved in the cloud (provided you save it) and can be used for you or any other technician in your company to compare the current operation to the day the system was installed. When benchmarked, the targets are centered, and the diagnostics become exponentially more accurate as now we have definitive measurements to compare the current operation to the past. Benchmarking is one of the most if not the most important feature of measureQuick.
Weather Conditions

Weather conditions are used to correct the temperature pressure charts for elevation, and to assure that the test conditions are within the guidelines of the program requirements. Weather information is pulled from nearby weather stations
Trending/System Vitals

Tap the trending button once and you will find graphic data. Trending allows the user to see a visual representation of the system operation over time to verify stability or trends like TXV hunting that could indicate other system wide issues.
Tap the trending button twice and the user will have the System Vitals (as seen in the picture) screen. In this screen, the user has the basic yet essential information to service a system. It's the simpler, friendlier version of it's big brother- the home screen. In this mode, there are basic instructions for the technician to follow... add/remove refrigerant or change airflow. For those that just want to get in, get out and move on.
Electrical

Scroll through to find EER, SEER, TESP and Fan Efficacy
Stream Data

This feature will be used when the user wants to share their live feed with another user, either another tech in the field or with the home office.
Education

Find helpful link to solve any problem.
Results

Find all saved reports here. They can be opened back up at anytime for continued use. Do not start a new project from the Results tab.
Projects

Each project workflow is designed to complete specific project requirements in a specific order and should not be deviated from and/or added to.
Toolbox

Add Bluetooth tools to your Toolbox, connect to Data Sharing Tools or even shop for "works with measureQuick" tools here. Once tools are linked to you toolbox and are mapped to their appropriate locations, they will remain there for future use until deleted or remapped.